Project Pajero

We thought we’d put together a little write up on our very own ‘Project Pajero’ and our opinions on setting one up for some off-road fun. Whilst some of the info and opinions will be Pajero specific, a lot is applicable to any 4x4 being setup. So whether you have a Pajero [...]

2020-05-14T14:36:40+13:0030 April 2020|

Aston Martin DB9 6litre V12 exhaust test

https://www.youtube.com/watch?v=RsKPvoIVvcY&feature=youtu.be&fbclid=IwAR0q_nHsNT2mUhfkdjJYwABLgAPPK4ohmxyf4lgCVytTGu_mO3OCUKlitio It’s hard to argue the fact most people will have some form of appreciation for an exotic car.   See a Lamborghini Gallardo Spyder a Ferrari F430 or an Aston Martin DB9 and even a non-car enthusiast would likely take a second glance.     Buying and driving a supercar however is not something within the budget of most. Enter Darren from XtremeX NZ. Darren [...]

2020-04-30T17:20:43+13:0029 April 2020|

Subaru WRX 2017 Upgrades

  We recently had the opportunity to tickle up a 2017 Subaru WRX. Late model vehicles can sometimes take a while to trickle down to the people that modify them, and it was a bit of an interesting one for the team that hadn't seen too much of Subaru's low mount turbo [...]

2020-03-30T16:29:15+13:0019 March 2020|

Tim’s V8 180SX

Recent dyno re-tuning of Tim’s V8 180SX saw intake air temperatures sky rocket to unsafe levels. Disappointingly this meant the power increases of his newly fabricated headers couldn’t yet be realised. To combat the high intake air temperatures we’ve fabricated this cold airbox and 4” intake to help draw cooler fresher air into the engine. [...]

2019-05-01T15:51:52+13:003 February 2017|

Matt Gaskin Motorsport VK56 R32

We are back to reality after an amazing weekend at Leadfoot Festival for the debut of the Matt Gaskin Motorsport VK56 R32. The car ran faultlessly all weekend with the only real issue being a lack of traction as the rear tyres struggled to contain the increased torque of the new engine package! Matt improved [...]

2019-05-01T15:51:52+13:0020 January 2017|

Pajero Rock Sliders

We are back in production mode, building Pajero rock sliders. This set is ready for assembly, with another two sets ordered for next week they are proving quite popular! We can also customise this design to suit other vehicles or any specific requirements you may have.

2019-05-01T15:51:52+13:0013 January 2017|

Please note that we are no longer offering the same services we once did.
Have a look around our website to see our current offerings!